Tools Rating: 4/5.
You also shouldn’t use the vacuum with the filter removed, as this allows dust, pet dander, and other particles to clog the motor and escape into the air.. We always recommend washing filters outdoors if possible.Any loose dirt or other particles on the filter will escape into the air when it’s removed..
Step 2: Locate and Remove the Shark Vacuum’s Filters.have a pre-motor filter and a post-motor filter.The pre-motor filter is typically a combination of foam and felt, while the post-motor is either a foam or.
Shark vacuums vary in design, so you should consult the user manual to find out where the removable filters are located.Keep in mind that not all filters are washable, so check which ones are safe to clean.. As an example, the Shark NV702UK series has three washable filters: a foam filter, felt filter, and a post motor filter..
The foam and felt pre-motor filters can be removed after taking out the dust canister..
The post motor filter is accessible via a filter door at the front of the machine..You want to use as little water as possible to reduce the risk of damage to your vinyl flooring.
A microfibre mop is a better choice than a string mop, as string holds a lot more water.. Mop from the furthest point towards your exit door to save you walking over wet floors.If you’ve got plank-style vinyl, mop with the grain for the best results..
Avoid using a steam mop.The heat and excess moisture produced by steam cleaners aren’t a good mix for vinyl floors..