These include a larger dust capacity and more hygienic emptying (as dirt is contained within a bag.).
Or is there something else that’s holding the belt in position?Does the brush need to be removed?
It’s important to check so you know how to attach the new belt.. Once you understand how the belt attaches, you may need to remove the brush roll (often by sliding it through the belt loop) and then detach the belt from the motor shaft.On some vacuums, you can just slide off the drive belt without needing to remove the brush roll..Take a few photos of the brush bar before you remove it, just in case you forget how the various parts fit back together..
Step 4: Install the New Belt.Start by placing the new belt around the motor shaft, then thread the brush roll through the belt.. You’ll then need to reinstall the brushroll back into its original location.
For flat or round belts, the tension required may require you to use a screwdriver to pry the end of the belt into the correct position..
Your New Belt Will (Probably) Look Too Small., one tablespoon of washing up liquid, and 500ml of warm water.. Pour a small amount of the mixture onto a clean white cloth, then gently apply the solution to the stain.
Allow it to sit for a few minutes, then blot it up with a dry cloth..If the stain isn’t fully removed, you may need repeat this step several times.
Keep blotting until the stain is no longer being transferred onto the white cloth..Don’t use too much cleaning liquid on your carpet.